Kompernass E-4575 Bedienungsanleitung Seite 44

 Remove the enclosed screws from the cable holder at the
rim of the aluminium water basin and remove the plastic
clip.
 Remove the decorative stones from the water basin.
 Take the natural-stone "cascade" body with the fixed water
pump from the natural-stone bank.
 Take the natural-stone bank with the fixed water pump from
the water basin.

Empty the water basin.
 Replace the natural-stone bank with the fixed water pump
to their original position in the water basin. Replace the
natural-stone "cascade" body to its original position on the
natural-stone bank.

Lead the power cable of the water pump to the fixed cable
clamp at the rim of the water basin and out of the water
basin.
 Fasten the plastic clip with the enclosed screws to firmly
clamp the cable of the water pump.
 Fill the water basin to the "MAX" mark with distilled water.
IRL
 | Operating Instructions
 Put the decorative stones in the water basin.
 Insert the plug of the water pump power cable to the plug
of the transformer power cable. Plug the transformer power
cable in a socket. The natural-stone water fountain is ready
for operation again.
. Remedy of faults
.. Water-resistant lamp does not work
If the water-resistant lamp is not working, replace the halogen
bulb.
To do so ...
 Unplug the transformer, wait 10 minutes to cool the lamp.

Disconnect the power cable of the water pump from the
transformer.
 Remove the decorative stones from water basin.
 Take the natural-stone "cascade" body from the natural-stone
bank.
 Take the natural-stone bank with the fixed water pump out
of the water basin.