Junction Box - Konig Electronic DMR-STICK6 Anleitung

C: Recording Mode: In Setting mode state, press "UP" or "DOWN" key to select REC MODE, press
"PLAY" key to enter Record Mode option (including SP, LP, SP+VOR, and LP+VOR): Press "VOL+"
or "VOL-" to change record mode, press "PLAY" key or "REC/STOP" key to confi rm and returns
automatically to Setting mode state.
D: Sensitivity Setting of Voice-Control Record: In Setting mode state, press "UP" or "DOWN" key to
select VOR SENSE, press "PLAY" key to enter VOR Recording Sensitivity, press "VOL+" or "VOL-"
to change sensitivity, press "PLAY" key or "REC/STOP" key to confi rm and return automatically to
Setting mode state.
E. EQ: In Setting mode state, press "UP" or "DOWN" key to select SET EQ, press "PLAY" key to
enter EQ Setting, press "VOL+" or "VOL-" to change EQ mode (5 modes, default normal), and press
"PLAY" key or "REC/STOP" key to confi rm and return automatically to Setting mode state.
F. Replay: In Setting mode state, press "UP" or "DOWN" key to select SET REP, press "PLAY" key to
enter Play Mode Setting, press "VOL+" or "VOL-" to change playing mode (3 modes: Normal, Repeat
Single, Repeat All, and default Normal), press "PLAY" key or "REC/STOP" key to confi rm and return
automatically to Setting mode state.
G. Check Remaining Record Time: In Setting mode state, press "UP" or "DOWN" key to select SEE
SPACE, press "PLAY" key to check remaining record time at current record mode (i.e. the value
displayed at lower line), and press "PLAY" key or "REC/STOP" key to return automatically to Setting
mode state.

Junction Box

1. Connect junction box with indoor telephone line, attached telephone line, and LINE-IN line, and
then connect it with the recording pen (following diagram).
indoor telephone line
External jack betwenn LINE-IN
2) After entering record state, press Record key to record telephone call.
7
Attached telephone line to
telephone set
screw