Assembly
♦
Guide the support frame through the recesses in the base frame. Tighten the
nuts using the open-ended spanner (see Fig. 1).
♦
Rotate the handlebars into the connecting rod. Tighten the bolts in the handlebar
using the included Allen key (see Fig. 2).
♦
Press the height-adjustable holder into the connecting rod while keeping the
button pressed. Release the button again in order to fix the height-adjustable
holder on the connecting rod (see Fig. 3).
♦
Push the connecting rod into the opening of the base frame. Fix the bolt into
the base frame using the Allen key supplied (see Fig. 4).
1
3
■
12
GB│MT
│
2
4
FTK 65 A1