Kompernass RLS 2 A1 Bedienungsanleitung

■ GB/CY
Introduction
Congratulations!
You have selected a high-quality product. The instruc-
tions are an integral part of this product. They contain
important information on usage and disposal. Use the
product only as described and for the range of applica-
tions specified. Retain these instructions for future
reference. Please also pass these operating instruc-
tions on to any future owner(s).
Intended use
This roller shutter lock is designed to prevent unau-
thorised opening of roller shutters and is not visible
from the outside. It is suitable for roller shutter models
with a gap of 5–11 mm between the guide rail and
the shutter segment. It prevents the roller shutter from
being pushed up from outside and thus provides in-
creased security when you are not in the house. The
roller shutter lock offers ideal protection of privacy
and can be used as an extra safety feature in addi-
SHUTTER LOCK RLS 2 A1
tion to a window lock.
This appliance is not intended for commercial applica-
tions.
Any other use or use beyond that specified is consid-
ered improper use. Claims of any kind for damage
SHUTTER LOCK
arising as a result of incorrect use will not be ac-
Operating instructions
cepted. The risk shall be borne solely by the user.
Package contents
OSIGURAČ ZA ROLETE
Upute za upotrebu
Before starting to use the device, check that all items
are present and undamaged. If the items supplied are
incomplete or damaged due to defective packaging
ROLLLADENSICHERUNG
or through transportation, contact Customer Services
Bedienungsanleitung
(see the section "Service").
▯ Roller shutter lock RLS 2 A1 (right+left)
▯ These operating instructions
IAN 113955
Installation
NOTE
► Insert one lock on the left and one on the right
like a wedge between the shutters and the
guide rail and tighten using the screw..
► Position the roller shutter lock close to the window
pane (not on the upper/lower window frame) as
otherwise the window can no longer be closed.
CAUTION
► It is possible that the roller shutter lock is not
usable on wooden shutters with a particularly
narrow guide rail.
♦ Pull the shutters down.
♦ Open the window and place the roller shutter
lock as close as possible to the shutter casing
(see Fig. 1).
LEFT RIGHT
Fig. 1
♦ Push the roller shutter lock with the label "RIGHT"
between the shutter and the guide rail on the
right. Slide the roller shutter back and forth until
you find the optimum clamping position for your
shutter system (example installation, see Fig. 2).
- 1 - - 2 -
Disposal
Dispose of the appliance in the normal household
waste. You can obtain further information from your
local disposal company or the city or local authority.
Dispose of all packaging materials in an
environmentally friendly manner.
Importer
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
Fig. 2
44867 BOCHUM
♦ Turn the screw in a clockwise direction to tighten
GERMANY
the roller shutter lock. This sets the moving part at
www.kompernass.com
an angle so that the clamping device sits firmly in
position.
Service
♦ Fit the left roller shutter lock in the same manner.
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
CAUTION
E-Mail: kompernass@lidl.co.uk
► Take care not to overtighten the roller shutter
IAN 113955
lock to avoid causing damage.
CY Service Cyprus
■ Your roller shutter is now locked against being
Tel.: 8009 4409
pushed up.
E-Mail: kompernass@lidl.com.cy
♦ To release the roller shutter lock, turn the screw
IAN 113955
anti-clockwise and pull it out of the guide rail.
Hotline availability: Monday to Friday 08:00 -
20:00 (CET)
Cleaning
♦ Clean the roller shutter lock with a slightly damp
cloth. For stubborn dirt, add a little mild detergent
to the cloth.
- 3 -
■ HR
Uvod
Srdačno čestitamo!
Time ste se odlučili za visokovrijedan proizvod. Upute
predstavljaju sastavni dio ovog proizvoda. One sadrže
važne napomene za uporabu i zbrinjavanje. Proizvod
koristite isključivo na opisani način i u navedenim
područjima uporabe. Ove upute dobro sačuvajte.
U slučaju predaje proizvoda trećim osobama priložite
i predajte i svu dokumentaciju.
Namjenska uporaba
Osigurač za rolete služi za zaštitu od neovlaštenog
podizanja roleta, i pritom nije vidljiv izvana. Prikladan
je za sve modele roleta s razmakom od 5-11 mm
između vodilice i segmenata rolete. Sprječava po-
dizanje rolete izvana te na taj način nudi povećanu
sigurnost. Osigurač za rolete nudi idealnu zaštitu
privatnosti i može se kao sigurnosna značajka koristit
dodatno uz osigurač za prozore.
Ovaj proizvod nije namijenjen za komercijalnu
uporabu.
Drugačija uporaba izvan ovih okvira smatra se
nenamjenskom. Isključena su sva potraživanja bilo
koje vrste na temelju štete nastale uslijed nenamjenske
uporabe. Rizik snosi isključivo sam korisnik.
Opseg isporuke
Prije puštanja u pogon prekontrolirajte cjelovitost
opsega isporuke i ustanovite postoje li eventualno
vidljiva oštećenja. U slučaju nepotpune isporuke ili
oštećenja zbog neispravnog pakiranja ili transportne
štete obratite se servisu za kupce (vidi poglavlje
„Servis").
▯ Osigurač za rolete RLS 2 A1 (lijevi+desni)
▯ Ove upute za uporabu
- 4 - - 5 -
Montaža
NAPOMENA
► Po jedan zatvarač gurnite s desne i s lijeve
strane poput klina između rolete i vodilice te
zategnite vijkom.
► Postavite osigurač rolete u područje staklene
ploče (ne na gornjem/donjem okviru prozo-
ra), jer se u protivnom prozor više neće moći
zatvoriti.
POZOR
► Osigurač za rolete se eventualno ne može kori-
stiti za drvene rolete s izrazito uskim vodilicama.
♦ Spustite roletu.
♦ Otvorite prozor i postavite osigurač za rolete što
je moguće bliže ispod kutije rolete (vidi sliku 1).
LEFT RIGHT
Slika 1
♦ Osigurač za rolete s oznakom „RIGHT" gurnite s
desne strane između rolete i vodilice. Pomicanjem
osigurača za rolete pronađite optimalan položaj za
vaš sustav roleta (za primjer montaže vidi sliku 2).
- 6 -