Herunterladen Inhalt Inhalt Diese Seite drucken

Philips HD6591 Anleitung Seite 15

Vorschau ausblenden Andere Handbücher für HD6591:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Problem
The CALC light is on
continuously.
I cannot close the lid
properly.
The coffee machine
produces less pod coffee
than before.
The temperature of the
coffee decreases quickly.
The filter coffee is not hot
enough.
Coffee grounds end up in
the insulated jug.
The coffee is weaker than
expected.
Possible cause
The float in the water reservoir
is stuck.
You need to descale the
machine.
Perhaps a used coffee pod is
sticking to the water
distribution disk.
Perhaps the sieve in the
center of the pod holder is
clogged.
You use the wrong type of
cups.
The cups are cold.
You have added cold milk to
the coffee.
You have not brewed a full jug. Coffee stays hot longer if you brew a
You have not removed the
pod holder.
You have not preheated the
insulated jug.
You have added cold milk to
the coffee.
Your paper filter may have
collapsed during brewing.
There may have been some
water in the insulated jug
when you started brewing
filter coffee.
Solution
Empty the water reservoir and shake it
a few times to release the float. Clean
the water reservoir with hot water and
some washing-up liquid or in the
dishwasher. If this does not help,
descale the machine (see chapter
'Descaling').
Perform the descaling procedure as
described in chapter 'Descaling'.
If this is the case, remove the used pod.
If the sieve is clogged, use a washing-
brush to unclog the sieve. If you cannot
unclog it properly with the washing-up
brush, put the pod holder in the
machine and descale the machine.
Descale the machine (see chapter
'Descaling').
Use thin-walled cups. Thin-walled cups
absorb less heat from the coffee than
thick-walled cups.
Rinse the cups with hot water. You can
preheat the coffee machine and cup by
brewing a cup of hot water first without
placing a coffee pod in the pod holder.
Do not use cold milk straight from the
refrigerator.
full jug of coffee to ensure that that the
coffee has the right temperature.
If you do not remove te pod holder, this
can lead to a longer brewing time.
Rinse the insulated jug with hot tap
water to preheat it .
Do not use cold milk straight from the
refrigerator.
To prevent the paper filter from
collapsing, fold the sealed edges.
Always make sure that there is no
water in the jug before you start
brewing coffee.
English
15

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis