Key Click (Tasten-Klick); Firmware Update - EUCHNER HBAS 094594 Handbuch

EUCHNER

5.1.5 Key click (Tasten-Klick)

It is possible to indicate when a key is pressed
by emitting a short sound.
Select using the arrow ->
and accept using the
Leave the window with <ESC>.
The setting currently saved is marked by the

5.1.6 Firmware Update

The hand-held pendant station is equipped with a flash
program memory. This enables the firmware to be changed
or updated. For this purpose the free of charge software
"Flash Magic" V1.66 is required (see also www.euchner.de).
Proceed as follows:
1. The HBAS is to be connected to the serial interface on the computer using
an RS422-RS232 interface converter and connected to the DC 24V power supply.
2. To load a new version of the firmware onto the
HBAS, the hand-held pendant station must be
placed in the programming mode.
For this purpose, Firmware Update is selected
in the Configuration (Konfiguration) menu.
Leave the window with <ESC>.
3. The "Flash Magic" software must be started.
095640-02-02/06
Hand-Held Pendant Station
with the <arrow keys>
-> -> ->
<ENTER> key.
Subject to technical modifications
*
(asterisk).
HBAS-094594
Tasten-Klick Tasten-Klick Tasten-Klick Tasten-Klick
Klick Ein Klick Ein Klick Ein Klick Ein
-> -> * * * * Klick Aus Klick Aus
-> -> Klick Aus Klick Aus
Auswahl Auswahl Auswahl Auswahl <ENTER> ENTER> ENTER> ENTER>
Zurück Zurück <ESC <ESC
Zurück Zurück <ESC <ESC
Firmware Update Firmware Update
Firmware Update Firmware Update
Zum Aktivieren Zum Aktivieren Zum Aktivieren Zum Aktivieren
Kommando senden Kommando senden Kommando senden Kommando senden
Zurück Zurück <ESC> <ESC>
Zurück Zurück <ESC> <ESC>
Page 16 / 40