DESCRIPTION OF THE DEVICE
①
Motion sensor with alarm
②
Red LED indicator lamp
③
Red window panel
④
Green LED indicator lamp
⑤
LED indicator lamp on the remote control
⑥
On/off button
⑦
Remote control
⑧
Spherical joint on the wall mount
⑨
Wall mount
⑩
Battery compartment cover
⑪
Socket on the motion sensor for attaching the spherical joint
BEFORE USING FOR THE FIRST TIME
Remove all of the packaging materials and check the
device and accessories for damage. Remove the battery isolation tab from the back of the remote
⑦
controls
to enable operation.
RISK OF SUFFOCATION! Keep all packaging
materials out of the reach of babies and children.
Make sure that all packaging materials are
disposed of in a responsible manner. You can find
out further information about collection points and
recycling from your local authority.
USING THE DEVICE
Please read through the operating instructions
carefully before using for the first time.
RISK OF SUFFOCATION AND CHOKING!
This device is not a toy. Children must not be
allowed to play with small parts and the batteries.
Inserting / changing the batteries
Motion sensor with alarm
1.
The device requires 4 type AA 1.5V batteries to operate.
2. Remove the battery compartment cover
in the cavity and pressing the clip down towards the battery compartment. Hold down the clip
and lift the battery compartment cover
3. If the device contains dead batteries, remove these and insert two type 1.5V AA batteries,
ensuring that the +/- terminals are correctly positioned.
4. Replace the battery compartment cover
5. The device is now in standby mode.
①
:
⑩
from the back of the device by inserting a fingernail
⑩
off.
⑩
and press until you hear it click back into position.
G