Opis 60s mobile Handbuch Seite 6

Format:
Example:
 
If the se ng is not accepted the phone rings twice and you can try again.
⓭ Se ng the speaker level
The speaker level of the receiver can be changed from 1 (lowest) to 9 (highest). Pick up
the receiver and dial:
Format:
Example:
 
⓮ Se ng the microphone sensi vity
The microphone sensi vity of the receiver can be changed from 1 (lowest) to 9 (high-
est). Pick up the receiver and dial:
Format:
Example:
 
⓯ Rese ng to factory defaults
You can reset all se ngs above to their factory default values. Pick up the receiver and
dial:
Format:
Example:
 
List of all commands
Command
*01#<local area code>* *01#01234*
*02#<1-9>#<phone
number>*
*03#<1-9>*
*04#<0-1>#<PIN>*
*05#<0-1>*
*06#<1-9>*
*07#<1-9>*
*08*
*<1-9>
6
*05#<0-1>* (0 – no roaming lock, 1- roaming lock enabled)
to disable roaming connec ons: *05#1*
 if the new se ng is accepted the phone rings once.
*06#<1-9>*
to set the speaker level to 5 (medium): *06#5*
 if the new speaker level is accepted the phone rings once.
07#<1-9>*
to set the microphone sensi vity to 5 (medium): *07#5*
 if the new microphone sensi vity is accepted the phone rings once.
*08*
to reset your phone to the factory defaults: *08*
 if the defaults are restored the phone rings once.
Example
*02#4#0123456789* Enter/Change a quick-dial number
*03#2*
*04#0#1234*
*05#0*
*06#5*
*07#5*
*08*
*5
Func on
Enter/Change a local area code
Change connec on delay
Disable/Enable PIN-lock
Disable/Enable Roaming-Lock
Change loudspeaker volume
Change microphone volume
Reset to factory defaults
Use quick dial