Cleaning And Maintenance - Electric House 70273 Gebrauchsanweisung

Use with cord
Insert the power supply plug (9) into
the power socket at the end of the hair
straighteners. Plug into a mains socket.
Switch the hair straighteners on using
the on/off switch (3). The indicator (2) will
come on. The ceramic surfaces of the hair
straighteners will heat up rapidly.
Use without cord
Insert the power supply plug (9) into the
power socket (8) at the back of the charging
stand. Plug into a mains socket.
Place the hair straighteners in the charging
stand socket (5). Switch on the charging
stand using the on/off switch (6), and
switch on the hair straighteners using
the on/off switch (3). The indicator (2) will
come on. The ceramic surfaces of the hair
straighteners will heat up rapidly.
Take the hair straighteners out of the
charging stand, and use them without the
cord. When their temperature drops too
low, replace them briefl y in the charging
stand to reheat.
Use
Your hair must be completely dry and
brushed through before you use the hair
straighteners.
Brush out a lock of hair approximately 5 cm
wide, and place it between the plates.
Clamp the hair straighteners together, and
allow the hair to heat up for a few seconds.
Draw the hair straighteners from the roots
towards the ends of the hair in a smooth
and even motion. Continue until you have
achieved the desired style.
When you have fi nished using the hair
straighteners, switch them off using the
on/off switch.
Timer
If the hair straighteners have been on for 60
minutes, they will switch off automatically.
Always remember, however, to switch the
hair straighteners off and unplug them after
use.

Cleaning and maintenance

Wipe the hair straighteners and the ceramic
plates using a well-wrung cloth once they
have cooled down.
Service centre
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open 7.00 to 16.00
• Tel.: +45 76 62 11 10
• Fax: +45 76 62 11 27
• E-mail: service@hpv.dk
DK
NO
SE
FI
GB
DE
19