Contents And Detail Of Parts; Technical Data; Positioning The Loudspeakers - Rainbow WP Line Einbauanleitung

If the sound remains poor on the suspect loudspeaker after swapping location and the distortion
moves with the loudspeaker to the new location, the loudspeaker may be the problem. If the
distortion remains in the original location then the problem is elsewhere in your audio/video system.
•
You must have proof of purchase to receive warranty service. Please keep your original sales receipt
and be prepared to provide this receipt in the event you require service.
2 pieces 3-way loudspeaker
2 pieces bracket
2 pieces thumb screw
4 pieces screw and screw anchor
1 piece installation manual
System
Peak power handling
Power rating
Sensitivity
Frequency response
Impedance
Woofer
Midrange
Tweeter
Dimensions (H x W x D)
Weight
Mounting both loudspeakers on a common solid surface facing the listening area will provide the best
audio results.
Do NOT mount the loudspeakers on surfaces that have hazards such as electrical wires or plumbing
behind them. Be sure that your mounting surface is capable of supporting the weight of the
loudspeakers.
Mounting brackets are included for wall and ceiling applications. The loudspeakers have two standard
6.3 x 20 (¼"-20) brass inserts incorporated into the rear of the enclosure for aftermarket mounting
systems.
We recommend that you take the time to experiment with the different speaker placements. Sound
quality and imaging are widely dependent on the location of your loudspeakers as well as room
acoustics. Angling each loudspeaker toward the listening position often provides the most realistic
imaging experience. The amount of perceived bass increases as you move a loudspeaker closer to solid
intersecting room surfaces (wall, ceiling, floor).

Contents and Detail of Parts

Technical Data

SPA-365 WP
60 Watt
30 Watt
89 dB 1W/1m
60 – 20.000 Hz
4 Ω
165 mm Polypropylene
25 mm Polypropylene
20 mm Piezo Dome
281 x 204 x 204 mm
2,50 kg

Positioning the Loudspeakers

3