Introduction - Zgonc YPL 1900 Originalbetriebsanleitung

Introduction

MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine
GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much
enjoyment and success.
Note: According to the applicable product
liability laws, the manufacturer of the de-
vice does not assume liability for damages
to the product or damages caused by the
product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instruc-
tions,
•
Repairs by third parties, not by author-
ized service technicians,
•
Installation and replacement of non-orig-
inal spare parts,
•
Application other than specified,
•
A breakdown of the electrical system that
occurs due to the non-compliance of the
electric regulations and VDE regulations
0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the
operating instructions
ing and commissioning
The operating instructions are intended to
help the user to become familiar with the
machine and take advantage of its appli-
cation possibilities in accordance with the
recommendations. The operating instruc-
tions contain important information on how
to operate the machine safely, profession-
ally and economically, how to avoid danger,
costly repairs, reduce downtimes and how
to increase reliability and service life of the
machine.
In addition to the safety regulations in the
operating instructions, you have to meet
the applicable regulations that apply for the
operation of the machine in your country.
Keep the operating instructions package
with the machine at all times and store it
in a plastic cover to protect it from dirt and
moisture. Read the instruction manual each
time before operating the machine and
carefully follow its information.
The machine can only be operated by per-
sons who were instructed concerning the
operation of the machine and who are in-
formed about the associated dangers. The
minimum age requirement must be com-
plied with.
In addition to the safety notes contained
in the present operating instructions and
the special regulations of your country, the
generally recognized technical rules for the
before install- operation of machines must be observed.
the device. We accept no liability for damage or acci-
dents which arise due to non-observance
of these instructions and the safety infor-
mation.
GB 21