Symbols Used In This Manual - Rothenberg Industrial HS-060B-30 Gebrauchsanweisung

SYMBOLS USED IN THIS MANUAL

= Read the operating
instructions
= Do not inhale poisonous fumes
= For radio / TV work
Operational safety instructions for the
soldering iron set
- Do not use the soldering iron if the handle, the mains cable or the mains plug are
damaged. Never open the soldering iron's housing!
- Do not expose the soldering iron to moisture or rain. The soldering iron may only
be used indoors.
- We recommend that you work in the vicinity of the mains socket so that you can
quickly pull the plug from the socket in the event of an emergency.
- Never heat up the soldering iron without a soldering tip fitted. Make sure that the
tip is correctly fitted before heating the soldering iron.
- The soldering tip may only be removed or changed when is cool and when the
soldering iron is off.
- Always rest the soldering iron on the stand provided if it is not in use. The
soldering stand can become hot when the soldering iron is placed on it. Danger
of burns!
- Do not touch the hot soldering iron tip, the melted solder or hot components
while soldering, risk of burns!
- This appliance may be used by children aged from 8 years and above and
by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children must not play with the tool. Cleaning and user maintenance
shall not be performed by children without supervision.
- Use the device only in well ventilated rooms. Toxic fumes can be produced when
soldering, which can lead to damage to the mucous membranes and/or chronic
respiratory illness.
- Wear eye protection
- Solder can contain lead. Do not eat, drink or smoke while soldering. Always wash
your hands thoroughly after finishing work.
- Be sure to disconnect the appliance from the mains after finishing work!
- The soldering iron is fitted with a special mains cable, which may not be
damaged. When working, take care not to touch the mains cable with the hot
soldering iron. To prevent the risk of injury, damaged mains cables may only be
1500000041_Anleitung_DE,GB,FR_Ausgabe 80%.indb 8 1500000041_Anleitung_DE,GB,FR_Ausgabe 80%.indb 8
= Wear eye
protection
= For electrical cables
8
= Caution
hot
14.10.15 13:26 14.10.15 13:26