Surge Protection; Temperature Protection; Error Messages & Protection Functions - SC Invoke Bedienungsanleitung

80
SC Invoke – Error Messages & Protections
Over 10 second protection
If you press and hold the Fire button for more than 10 seconds, the unit will automatically switch off� The display
will show OVER 15s�
Resistance Too Low
If the coil resistance drops below 0�1 ohm in VW or Smart mode or below 0�05 ohm in TC mode, the display will
show ATOMIZER LOW�
Surge Protection & No atomizer Head Detected
If a power surge occurs in the atomizer, the display shows ATOMIZER SHORT� NO ATOMIZER will appear on the
screen when no atomizer is connected�

Surge Protection

If the voltage of the battery drops below 3�1 volts, the display will show BATTERY LOW and then LOCK� Charge the
battery to unlock the device�

Temperature Protection

When the coil reaches the set temperature in TC mode, the TEMP PROTECTION screen appears�
You can continue to use the device as usual�