Physical Descriptions; Mounting; Power Supply; Ventilation - Abus TVAC10030 Bedienungsanleitung

5. Physical descriptions

VGA input
Audio input

Power Supply

6. Mounting

6.1 Power supply
Before you start with the installation please make sure that the main voltage and the nominal voltage of
the monitor comply together.

6.2 Ventilation

Please provide sufficient ventilation. The cooling openings may not be covered for sufficient ventilation.

6.3 Wall Mount

For mounting the monitor at a wall please use a VESA compatible wall mount. At the backside of the
monitor there are squarely arranged assembly holes (Middle distance 75 mm). These are compatible with
the ABUS TVAC10500 wall mount.
Please take the cover from the table stand at the monitor backside and screw off the table stand.
Please also pay attention to the installation manual of the wall mount.
During the mounting of the TFT monitor it must be separated from the mains voltage.
Audio
Input
VGA input
PC signal input
Audio signal input
DC 12V, 5,0 A
18
Power supply
English