1.
Contenuto della confezione
1x IB-AC606-U3, 1x manuale
2.
Caratteristiche
•
Involucro esterno per 2,5'' SATA HDD/SSD
•
Per 9,5 millimetri HDD/SSD, capacità: nessun limite
•
USB 3.0 con UASP fino a 5 Gbit/s
•
Display a LED per l'alimentazione e HDD/SSD accesso
•
Installazione senza attrezzi
•
Involucro di plastica con anello illuminato
•
Plug & Play, Hot Swap
•
Windows, Mac compatibile
3.
HDD/SSD installazione
Staccare tutti i cavi di connessione con il computer durante il montaggio e lo smontaggio del disco
fisso.
4.
Applicazione
4.1
Il contenitore esterno può essere collegato direttamente al computer tramite il cavo USB. Il dis-
co fisso può essere collegato o staccato dal computer durante il funzionamento di quest'ultimo.
4.2
Attendere la fine di funzioni di lettura e di scrittura prima di staccare un contenitore esterno
collegato al computer, per evitare perdite di dati.
4.3
Ogni nuovo disco fisso deve venir inizializzato, partizionato e formattato dal drive, prima di
poter essere indicato dal sistema.
4.4
Se il disco fisso non viene riconosciuto subito dal sistema, verificare:
- se il software di drive relativo è installato (USB),
- se il disco fisso è stato inizializzato, partizionato e formattato.
© Copyright 2016 by RaidSonic Technology GmbH. All Rights Reserved.
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no
responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes in the
specifications and/or design of the above mentioned product without prior notice. The diagrams contained in this manual may
also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic Technology GmbH
assumes no responsibility for any differences between the product mentioned in this manual and the product you may have.
Manuale: IB-AC606-U3
Manuel: IB-AC606-U3
1.
Contenui de la livraison
1x IB-AC606-U3, 1x Manuel
2.
Spécialités principales
•
Boîtier externe pour 2,5" SATA HDD/SSD
•
Pour 9,5 mm HDD/SSD, la capacité: aucune limite
•
USB 3.0 avec UASP jusqu'à 5 Gbit/s
•
Affichage LED pour la puissance et accès HDD/SSD
•
Installation sans outil
•
Boîtier en plastique avec anneau lumineux
•
Plug & Play, Hot Swap
•
Windows, Mac compatible
3.
Installation HDD/SSD
Devant l'installation ou la désinstallation d'un disque dur il faut débrancher tous câbles de connexion
à l'ordinateur.
4.
Application
4.1
Le boîtier externe peut être connecté directement à l'ordinateur en utilisant le câble USB. Le
disque dur peut être branché ou débranché de l'ordinateur pendant l'exploitation normale de
l'ordinateur.
4.2
Attendez le complètement des écritures et des lectures avant de déconnecter un boîtier branché
à l'ordinateur pour éviter une perte de données.
4.3
Avant tout, un disque dur nouvel doit être initialisé, partitionné, et formaté par le système
d'exploitation pour être indiqué par le système.
4.4
Si le disque dur n'est pas reconnu immédiatement par le système, vérifiez le suivant:
- si le logiciel de pilotes est installé (USB),
- si le disque dur est initialisé, partitionné, et formaté.
Handbuch: IB-AC606-U3
1.
Verpackungsinhalt:
1.
Package contents
1x IB-AC606-U3, 1x Bedienungsanleitung
1x IB-AC606-U3, 1x Manual
2.
Merkmale
2.
Key Features
•
Externes Gehäuse für 2,5" SATA HDD/SSD
•
External enclosure for 2.5'' SATA HDD/SSD
•
Für 9,5 mm HDD/SSD, keine Kapazitätsbeschränkung
•
For 9.5 mm HDD/SSD, capacity not limited
•
USB 3.0 mit UASP bis zu 5 Gbit/s
•
USB 3.0 with UASP up to 5 Gbit/s
•
LED Display für Betrieb und Festplattenaktivität
•
LED Display for power and HDD/SSD access
•
Werkzeuglose Montage
•
Tool-less HDD/SSD Installation
•
Plastikgehäuse mit beleuchtetem Ring
•
Plastic case with elumated ring
•
Plug & Play, Hot Swap
•
Plug & Play, Hot Swap
•
Windows, Mac kompatibel
•
Windows, Mac compatible
3.
Festplattenmontage
3.
HDD/SSD Installation
Beim Ein- und Ausbau der Festplatte müssen alle Kabelverbindungen zum Computer gelöst werden.
During the HDD/SSD assembly all cabling has to be disconnected from the computer.
4.
Application
4. Anwendung
4.1
The external HDD/SSD can be connected to or disconnected from the computer via USB cable
4.1
Die externe Festplatte kann im laufenden Betrieb des Rechners an diesen via USB Kabel ange-
without shutting down the computer.
schlossen oder von diesem getrennt werden.
4.2
Please await the end of read/write operations before disconnecting the HDD to avoid data lost.
4.2
Bitte das Ende von Schreib- und Lesevorgängen abwarten bevor ein angeschlossenes Gehäu-
4.3
A new HDD/SSD must first be initialised, partitioned and formatted by the operation system to
se vom Rechner getrennt wird, um Datenverlust zu vermeiden.
be displayed by the system.
4.3
Eine neue Festplatte muss vom Betriebssystem erst initialisiert, partitioniert und formatiert wer-
4.4
If the hard disc isn't recognised instantly by the operating system please check:
den, um vom System angezeigt zu werden.
- if the driver software is installed (USB),
4.4
Wenn die Festplatte nicht sofort vom System erkannt wird bitte prüfen:
- if the HDD/SSD is initialised, partitioned and formatted.
- ob die Treibersoftware installiert ist (USB),
- ob die Festplatte initialisiert, partitioniert und formatiert ist.
Manual: IB-AC606-U3
Manual: IB-AC606-U3
USB 3.0 External enclosure for 2.5" SATA HDD/SSD
Handbuch IB-AC606-U3
Externes USB 3.0 Gehäuse für 2,5" SATA HDD/SSD
Manuel IB-AC606-U3
USB 3.0 Boîtier externe pour 2,5" SATA HDD/SSD
Manuale IB-AC606-U3
USB 3.0 Involucro esterno per 2,5'' SATA HDD/SSD
Manual IB-AC606-U3
USB 3.0 Recinto externo de 2,5" SATA HDD/SSD
Podręcznik obsługi IB-AC606-U3
USB 3.0 Zewnętrzna obudowa do 2,5'' SATA HDD/SSD
Manuál IB-AC606-U3
USB 3.0 Externí skříň pro 2,5'' SATA HDD/SSD
Εγχειρίδιο IB-AC606-U3
USB 3.0 Εξωτερικό περίβλημα για 2,5'' SATA HDD/SSD
Gebruikershandleiding IB-AC606-U3
USB 3.0 Externe behuizing voor 2,5" SATA HDD/SSD
Használati utasítás IB-AC606-U3
USB 3.0 Külső ház mert 2,5" SATA HDD/SSD