Search / Automatic Search; Manual Station Search - Hama 00054828 Bedienungsanleitung

6.1 Search / Automatic search

The automatic DAB channel search scans the DAB band III
for available stations. After the station search, all
interference-free stations are saved in alphabetical order.
The automatic DAB station search starts automatically
when DAB mode is started for the first time; it is indicated
by Scanning... and a status bar on the display.
If you would like to start the search again, proceed as
follows:

6.2 Manual station search

With the manual station search function you can search
through individual frequencies and channels. If you know
the frequency of the desired station and the automatic
station search failed to find it, use this feature to set the
reception frequency directly.
Proceed as follows, choosing a frequency range between
5A and13F:
[Menu]
Full Scan
The bar indicates the current signal strength. The marking
along the bar indicates the value required for interference-
free reception. If this value is not reached (the bar is
empty), then the signal strength is not sufficient on this
channel.
7
[Menu]
Manuell einstellen