axing basic-line SPU 94-05 Betriebsanleitung Seite 4

Field of application:
The devices are suited only for distributing radio and television signals
in the house! If a device is used for other purposes, no warranty is
given!
The picture shows an application example for distribution of 4 SAT IF
polarization levels including terrestrial signals (e.g FM radio).
terr. input
SAT inputs system 1 SAT inputs system 2
2
Subscriber ports
RF-Installation:
4
Connect the SAT inputs of the multiswitch to the LNBs of your
SAT reception antenna. Connect the output signals of a terrestrial
amplifier or a CATV amplifier to the terrestrial input.
4
Connect the outputs multiswitch to the antenna sockets. Use
highly shielded coaxial cables with F connectors. Suitable cables
and connectors can be found in the current AXING catalogue or
under www.axing.com.
Grounding, Mounting and Power supply:
4
To avoid dangerous power surges (e.g. risk of fire and danger of
life) all devices must be grounded. Use the screw terminal at the
device 1.
4
Important: Please make sure, that possible standards and safety
regulations regarding electrical grounding must be kept.We
would therefore recommend to use QEW Earthing angles
4
Use the included mounting screws and the mounting holes of the
device 2
2
1