Werbung
Verfügbare Sprachen
Verfügbare Sprachen
18874 Sheet Music Holder
- Suitable for 18860 »Spider Pro« or 18840 »Baby Spider Pro«
- Stable, flexible and practical
- Can be positioned freely on the stand column
- W x H: 480 x 240 mm
Thank you for choosing this product. This instruction manual informs you about the important steps to set up and handle the product. We recommend to keep
the manual in a separate place for a possible later use.
SAFETY NOTES
- Please follow the set-up instructions carefully
- Take into consideration the safety notes and assembly instructions
-
for the »Spider Pro« models 18840 and 18860
- Not suitable for the »Spider« 18850
- Observe the instructions for folding the sheet music holder correctly
- Do not unbalance or overload the holder
SET-UP INSTRUCTIONS
The sheet music holder consists of 2 COMPONENTS:
A. Foldable sheet music holder frame
B. Clamp with angle bracket
To ATTACH the holder to the Spider
1 Open the clamp by releasing the clip
2 Hold the clamp onto the column of the Spider
3 The clamp is fixed onto the column by flipping the clip
3
until it stops
4 If the clamp is too loose (or too taut), release the clip
4
and turn it 180° clockwise (or anticlockwise if too
4
taut). Then flip the clip again. Repeat the process until
4
the clamp is attached tightly to the column.
MOUNTING the sheet music holder frame
5 Screw the frame to the angle bracket
6 Unfold the sheet music holder frame (see leaflet)
USE INSTRUCTIONS
HEIGHT
7 Release the clip and slide the now loose clamp along the
7
column to the required position.
7
Fix the position by returning the clip.
TILT
8 Loosen the wing nut and move the sheet music holder
8
frame to the required inclination. Tighten the wing nut.
GAP & ORIENTATION
9 Loosen lower wing nut and position sheet music holder frame
9
a. Column gap (40mm) - b. Orientation (max. 360°)
9
Fix position by tightening the wing nut.
MAINTENANCE, CLEANING
- Remove the iPad before carrying out maintenance and
-
be aware of any hazards
- Use a non-scouring cleaning formula and preferably
-
a slightly damp cloth for cleaning
- Observe the correct order for unfolding and folding the
-
sheet music holder frame
FAULT-FINDING (FF) and REPAIR (R)
FF: Holder wobbles
FF:
R: Clamp incorrectly set:
FF: R:
See point 4 of SET-UP INSTRUCTIONS.
FF:
R: WARNING! Holder is unsuitable for the column
FF: R: WARNING!
of the »Spider« 18850.
FF: Sheet music holder frame wobbles
FF:
R: Tighten the wing nuts 8, 9
TECHNICAL DATA
clamp, clip, grips: black PA
angle bracket, connecting elements: black powder coated steel
Materials
joints: zinc die cast
connection elements: black steel
Size
sheet music holder frame W x D x H: 480 x 42 x 240 mm
Carton
300 x 220 x 150 mm; 1.6 kg
Weight
1.3 kg
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
18874-000-55 Rev.03 03-80-177-00 9/12
COMPONENTS
7
INSTALLATION
TILT
ASSEMBLY
GAP AND ORIENTATION
HEIGHT
Werbung
