Herunterladen Diese Seite drucken

AEG Ideal Steam Anleitung Seite 20

Werbung

26
27
28
20
29
30
31
26. Faltenlose Ärmel: Beim Pressen
das Bügelkissen in den Ärmel
schieben.
27. Den Ärmel von der Manschette bis
zur Schultermitte gefaltet auf das
Bügelbrett legen, glattstreichen und
pressen. Dabei entstehen zwei
provisorische Falten. Mit Dampf oder
Wasser
anfeuchten.
Nun
provisorischen Falten wie folgt
herausbügeln : Den Ärmel an der
Naht falten und auf das Bügelbrett
legen. Dabei den Vorderteil des
Ärmels, wie abgebildet, über die
Brettkante herausstehen lassen. Mit
Dampf pressen.
28. T-SHIRT (Baumwolle)
Ärmel: Legen Sie den Ärmel flach
auf das Bügelbrett, dabei das obere
Ärmelteil der Form des Bügelbrettes
anpassen. Pressen und öffnen.
Körper: Flach auf das Bügelbrett
legen. Pressen und öffnen.
29. SCHÜRZEN: Zunächst Bund und
Falten bügeln, dann die übrige
Schürze.
FALTENRÖCKE
30. Den Bund über das Bügelbrettende
ziehen,
die
Falten
sorgfältig
anordnen und pressen.
31. Beim Pressen des unteren Rockteils
können die Falten - je nach Art des
Kleidungsstückes - geheftet oder am
Bügelbrettpolster festgesteckt werden.
26. Sleeves without pleats :
Use the small cushion or a
rolled soft thick flannel.
27. Place the sleeve on the board,
folded from the wrist to the
middle of the shoulder. Press.
Two pleats will be marked
die
initially. Steam or damp and
smooth out the two pleats with
the sleeve folded along the
under-arm sleeve seam. Let the
sleeve pass the front of the
board.
28. T-SHIRT (cotton)
The sleeves : Place them flat on
the board, adapting the shape
of the shoulder to the shape of
the board. Press and open.
The body : Place it flat. Press
and open.
29. APRONS : Press first the
waistband and the pleats, then
the rest of the apron.
SKIRTS WITH PLEATS
30. Slip waist on end of board.
Press. Arrange pleats carefully.
31. To press the pleated part, first
arrange pleats carefully.

Werbung

loading