LD Systems LDCURV500SLA Bedienungsanleitung

USER´S MANUAL
LDCURV500SLA(W) / LDCURV500S2(W)
SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. During installation, observe the applicable safety regulations for your country.
7. Never place sources of ignition, e.g., burning candles, on the equipment.
8. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in
this case, observe the special instructions noted below. Do not expose this equipment to flammable materials,
fluids or gases.
9. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with
liquids, such as vases or drinking vessels, on the equipment.
10. Make certain that objects cannot fall into the device.
11. Use this equipment only with the accessories recommended and intended by the manufacturer.
12. Do not open or modify this equipment.
13. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping
hazards.
14. During transport, make certain that the equipment cannot fall down and possibly cause property damage
and personal injuries.
15. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if
it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is a
powered device). This equipment may only be repaired by authorized, qualified personnel.
16. Clean the equipment using a dry cloth.
17. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
18. Plastic bags must be kept out of reach of children.
CAUTION – HIGH VOLUME LEVELS WITH AUDIO PRODUCTS!
This equipment is intended for professional use. Therefore, commercial use of this equipment is subject to the
respectively applicable national accident prevention rules and regulations. As a manufacturer, Adam Hall is ob-
ligated to notify you formally about the existence of potential health risks. Hearing damage due to high volume
and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL) that
can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid
prolonged exposure to volumes in excess of 90 dB.
To prevent possible hearing damage, avoid listening at high volume levels over long periods of time.
Even exposure to short bursts of loud noise can result in hearing loss. Please keep the volume
constantly at a comfortable level.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Anspach
/ Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled to promote sustainable economic activity.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal
LDCURV500SLA - CURV 500® SMARTLINK® ADAPTER
SmartLink® adapter with connections and stand flange as the base for up to 4 CURV 500® array satellites.
13
5
3
3
4
11
9
11
LDCURV500SL2 - CURV 500® SATELLITE SPEAKER
Two CURV 500® array satellites with the patented click mechanism and WaveAhead® technology.
5
3
3
4
7 8
10
6
10
11
9
11
Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
1
2
CONNECTIONS, CONTROLS, MECHANICS
1
Release button LD CURV 500® satellite
2
Guide rail LD CURV 500® satellite
3
Grooves SmartLink® Adapter or LD CURV 500® satellite
4
Locking system
5
Contacts
6
Satellites 1 / 2: 16 mm flange for 1 to 2 satellites (upright position).
7
Satellites 3 / 4: 16 mm flange for 3 to 4 satellites (forward tilt position).
8
Input Signal: Speakon-compatible speaker input. The speaker input is parallel wired with the terminal block
connection .
9
9
Terminal Block Connection: Terminal block connection for permanent installation and desktop application
(terminal block included). The terminal block connection is parallel wired with the Speakon-compatible
speaker input 8 .
10
M6 thread: Two M6 threads for attaching the wall mounting bracket LDCURV500WMB. One of the threads in
the truss mounting is used for mounting an M6 safety eyelet (not included).
11
M6 thread: Two M6 threads for attaching the wall mounting bracket LDCURV500WMB, or the truss mounting
adapter LDCURV500TMB.
12
M3 thread: M3 thread to secure the LD CURV 500 satellites in permanent installations.
13
Rubber feet: 4 rubber feet provide stability for desktop applications. For the installation of the ceiling mount
bracket LDCURV500CMB, unscrew the rubber feet (M3 thread).
SETUP
Slide a CURV 500® satellite from the rear onto the SmartLink® adapter until it stops, while pressing the spring-loaded
1
release button on the side of the satellite. Ensure that the two guide rails
3
grooves on the top of the SmartLink adapter (or CURV 500® satellite) in order to ensure a tight fit and establish a
contact for both components. Now release the button to lock the connection and to bring the button back to its original
position. Proceed in the same manner as described above to add other satellites. When disassembling, please proceed
in reverse order. For fixed installations and desktop applications, a terminal block connection (terminal block included)
is located on the back of the SmartLink® adapter. The Speakon-compatible speaker input INPUT SIGNAL
parallel wired with the terminal block connection
For more information about setting up and wiring, please refer to the user's manual of the LD CURV 500®
portable array system on WWW.LD-SYSTEMS.COM.
SPECIFICATIONS
Model name: LDCURV500SLA
Product type: SmartLink ® adapter as base for up to 4 CURV 500 ® array satellites.
Material: diecast aluminium
Surface: powder coating
Connectors: 1x Speakon compatible, 1x terminal block
Dimensions (W x H x D): 122 x 57 x 122 mm
Weight: 0,54 kg
Features: dual 16 mm flange, 4x M6 thread for optional wall/truss mount,
SmartLink® System, 4x rubber feet for desktop use, 4x M3 thread for
optional ceiling mount
Model name: LDCURV500S2
Product type: LD CURV 500® array satellites (2x)
Material: fiecast aluminium
Surface: powder coating
Loudspeakers: MF: 1 x 4" / HF: 3 x 1" with WaveAhead® Technology
Dispersion (H x V): 110° horizontal, 10° vertical per satellite
Impedance: 16 ohms
Dimensions (W x H x D): 122 x 122 x 122 mm (1 piece)
Weight: 1,73 kg (1 piece)
Features: WaveAhead® Technology, internal crossover, metal grille,
SmartLink® System, M3 safety thread for fixed installation
12
2
2
of the satellite slide properly into the
9 .
EN
8 is