Attention: Important Operational Information. Please Read Before Installation.
•
The loudspeaker may be operated only with the system-synchronized crossover and under
observance of the specified rated output power.
•
Interchanging the woofer and tweeter connections will lead to immediate destruction of the tweeter.
•
Beginning operation without the crossover, for example with an active crossover or non-system
crossover, will result in damage to the loudspeaker.
•
The tweeter is not intended for active operation without passive crossover. Disregarding this will
thermally damage the tweeter by feeding it at too-high power levels.
•
When connecting the loudspeaker, crossover, and amplifier it is absolutely necessary to employ the
same polarity. Interchanging the polarity produces an unnatural sound lacking bass reproduction.
•
The component systems are acoustically synchronized as one unit. Supplementation through an
auxiliary loudspeaker or tradeout with a larger woofer is not possible as this would change the overall
frequency response or impedance of the system. An overload of the crossover or a single
loudspeaker would then be unavoidable.
•
The opening of the crossover for the purpose of altering the parts or function, for example bi-amping,
is considered foreign interference and grounds for termination of the warranty
•
For the purpose of technical safety, the loudspeaker should only be attached with the included self-
tapping screws. We accept no liability for use of alternative methods of attachment.
Fastening for Woofer:
grill 165 mm or 200 mm ∅ metal, black with rainbow logo (optional)
2 pieces
woofer 165 mm or 200 mm ∅
2 pieces
installation 165 mm or 200 mm ∅ (optional)
2 pieces
8 pieces
self-tapping screw 3,9 x 32 DIN 7981 black
8 pieces
washer
8 pieces
self-tapping nut
Fastening for Tweeter:
2 pieces
DL-T20 (cable connection)
2 pieces
fastening ring
2 pieces
tweeter stand ring
2 pieces
intermediate ring
2 pieces
flush mount cup
2 pieces
angle mount cup
2 pieces
Dashboard bracket
Fastening for Crossover:
2 pieces
crossover
8 pieces
self-tapping screw 3,9 x 13 DIN 7981 black
Miscellaneous:
1 piece
installation manual
Contents and Detail of Parts
M4 DIN black
3,9 DIN galvanized
17
A
B
C
G
H
I
J
M
O
U
S
W
Z