Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• activating the integrated RadioStation™ and selecting the transmitting frequency
Press the joystick to the left or right to select "e
button to activate the integrated RadioStation™ of the
Then select the frequency from the frequency range of 87.5 MHz to 108.0 MHz, on which the
EN
audio files are to be transmitted. To do so, briefly press the joystick to the left or right
to change the transmitting frequency in 0.1 MHz increments, or hold the joystick down to the
left or right to change the transmitting frequency in 1.0 MHz increments. Confirm the
selected transmitting frequency by pressing the button.
Next, set your radio to the same frequency that you previously selected on the
cebrax RS
Note:
• When the integrated RadioStation™ is enabled, a symbol indicating this will show up in the display,
on the right next to the equalizer symbol.
• If you turn the
integrated RadioStation™.
• If you interrupt the music by pressing the button, the transmitting frequency will be cleared
again after 30 seconds, which means the RadioStation™ will be put into the standby mode.
If you continue to play the music by pressing the button, the RadioStation™ will automatically
be reactivated.
• Deactivating the integrated RadioStationTM
Press the joystick to the left or right to select "d
the button to deactivate the integrated RadioStation™ of the
After the integrated RadioStation™ has been deactivated, no additional audio files are
transmitted on the frequency you selected.
Mode: Voice recording
Switch to "v
oice
You can record your voice using the integrated microphone. Briefly press the button to start
voice recording. Briefly press the button again to stop recording.
Note: All voice recordings are saved in the "VOICE" folder of the
Mode: Settings
Switch to the "s
This mode allows you to set the equalizer, the different playback functions, the duration of the
display, the contrast, the energy-saving mode and the sleep timer.
Push the joystick to the left or the right to select the desired setting, and confirm by
pressing the button.
. After which you can start playing the desired audio files.
i.Beat cebrax RS
" mode.
" mode.
ettings
" and confirm by pressing the
nAble
i.Beat cebrax RS
off and back on again, you will have to reactivate the
" and confirm by pressing
isAble
i.Beat cebrax RS
– 10 –
.
i.Beat
i.Beat cebrax RS
.
.
Werbung
