Beem Tea Expresser Bedienungsanleitung Seite 7

The teapot set comprises
–
Kettle with a maximum filling volume of 1,700 ml
–
Teapot with a maximum filling volume of 700 ml
–
A lid to fit both the teapot and the kettle
•
Pour water into the kettle and boil it with the lid on.
•
Add the tea leaves or teabag to the teapot and pour hot
water over the tea. Note the maximum filling quantity of
the teapot.
•
Take the lid from the kettle and place it on the teapot.
You will need to press down slightly until the lid clicks
into place. Place the teapot on top of the kettle. The hot
water in the kettle keeps the tea in the tea pot warm.
The teapot set cannot be put in the dishwasher due to the
rubber handles. Scourers and scouring powders containing
sand scratch the surface and should therefore not be used.
Rainbow-coloured rims are a sign of overheating; these dis-
appear after several uses. Yellow or even brown discoloura-
tions caused by overheating remain.
Rust stains are caused by iron and lime residues in the
water and are purely superficial. They can be removed
using conventional detergents designed for stainless steel
cookware.
Small white marks appear on the base as a result of using
calcareous water. All kinds of marks can be removed using
vinegar and/or lemon juice, covering with warm water and
leaving to stand overnight.
BEEM - Elements of Lifestyle
Use of the teapot set
Preparing tea
Special cleaning instructions
GB