Herunterladen Inhalt Inhalt Diese Seite drucken

Getting Started; Unpacking Your Carrier; Included Components - Chariot corsaire 2 Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für corsaire 2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

8
4

GETTING STARTED

4.0 unPackInG your carrIer

1
A.
Open the box flaps and remove the staples.
(See image 1)
B.
Remove the handlebar from inside the box and set
it beside the box.
C.
Lay the box on its side on a clean, sturdy surface.
D.
Slide the carrier and wheels out of the box.
E.
Remove both of the spring spacers from the leaf
springs on both sides of the carrier. Press firmly
down on the carrier against the ground and pull the
spacers out by the tag.
NOTICE
This child carrier is not packaged with any
CTS™ conversion kits. These kits are sold and
packaged separately.
B

4.1 Included comPonents

Verify that your carrier was packaged with the
following items:
Corsaire Chassis
Two-in-One Cover (on Chassis)
Handlebar
Two 20 inch Wheels
Parking Brake
The Owner's Manual
NOTICE
Store your carrier and its components in a safe
dry place so that when they are needed, they
are in the best possible condition.
www.chariotcarriers.com
51100457

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Chariot corsaire 2

Diese Anleitung auch für:

Corsaire 1

Inhaltsverzeichnis