6.3.3 Battery Charge Level And Remaining Range En; Changing Assist Mode - Kalkhoff IMPULSE EVO Originalbetriebsanleitung

Via the battery
1. Briefly press the battery button twice. The Impulse Evo system
switches off after a few seconds.
You can switch off your Impulse Evo / Impulse Evo Next
pedelec from any level in the menu. The start menu does not
need to be displayed for this.
The last configured settings remain saved.
If the pedelec remains stationary for 10 to 20 minutes, the
Impulse Evo / Impulse Evo Next switches itself off.
6.3.3 Battery charge level and remaining range
The battery charge level and remaining range are shown in the top of the
display. A battery-shaped icon shows the remaining range, telling you how
long the Impulse Evo system can continue to assist you. The lower the
battery charge level, the shorter the black part in the battery. The range
also shows a lower value. When the charge level of the battery falls below
a minimum, motor assist also cuts out.
High battery charge level
POWER
180 km 16:53
and long remaining range
14
.5
Measurements are taken whilst the cycle is being ridden.
km/h
The display calculates an average value from the readings
Hinweis (1/1)
of the last 20 kilometres ridden. This value is then used as
Schiebehilfe
the basis for the remaining range. So the remaining range
displayed is heavily dependent on the riding style over the
last 20 kilometres.
EN-50 Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
Low battery charge level
POWER
30km km 16:53
and short remaining range
14
.5
km/h
Hinweis (1/1)
Schiebehilfe
Symbol Battery charge level
100 – 75 %
74 – 50%
49 – 25 %
24 – 10 %
0%
6.3.4

Changing assist mode

1. You must be in the start menu to change the assist mode. Select the
assist level you require by briefly pressing the / buttons.
Display Assist
ULTRA *
Assist function is working with
maximum power
POWER
Assist function is working hard
SPORT
Assist is working with medium power
ECO
Assist is working with low power
OFF
No assist
2. Assist starts working as soon as you start pedalling. Assist cuts out
as soon as you stop pedalling or when you have reached a speed of
25 km/h.
Power consumption
Very high
High
Medium
Low
Very low