Auxiliary Input Socket; Maintenance; Specifications - Makita DMR103 Betriebsanleitung

3. Rotate the Tuning control to
the loudness function, then press the Tuning control
to confirm the setting.
4. To turn off the loudness function, select OFF and
press the Tuning control

Auxiliary input socket

Two 3.5 mm stereo Auxiliary Input sockets are provided.
One is at the font of your radio; the other is AUX IN 2 is
located in the battery compartment.
1. Repeatedly press and release the Source button
until AUX IN 2 is displayed.
2. Connect an external audio source (for example, iPod,
MP3 or CD player) to the Auxiliary Input socket.
3. Adjust the volume setting on your iPod, MP3 or CD
player to ensure an adequate signal level from the
player, and then use the Tuning control
radio as needed for comfortable listening.

MAINTENANCE

CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.

Specifications:

Power Requirements
AC power adaptor DC12 V/1200 mA, center pin
positive
Battery UM-3 (AA size) x 2 for back up
Cluster battery: 7.2 V - 18 V
Slide battery: 9.6 - 18 V
Frequency coverage FM 87.50 - 108 MHz
(0.05 MHz/step)
AM (MW) 522 - 1629 kHz
(9 kHz/step)
Circuit feature
Loudspeaker 3 inches 8 ohm
Output Power 7.2 V: 0.5 W x 2, 9.6 V: 1 W x 2,
10.8 V:1.2 W x 2, 12 V: 1.5 W x 2,
14.4 V: 2.2 W x 2, 18 V: 3.5 W x 2
Input terminal 3.5 mm dia. (AUX IN1/AUX IN2)
Antenna system FM: soft bended rod antenna
AM: bar antenna
Dimension (W x H x D) in mm
280 x 302 x 163
Weight 4.2 kg (without battery)
12
choose ON to turn on
to confirm the setting.
on the