MA lighting 8Port Node Handbuch Seite 42

Save Configuration /settings
You can save the settings of MA 8Port Node on the hard drive of a grandMA2 console/onPC or (version 2.9 and
higher) on a USB-flash drive.
Open menu SETUP / NETWORK /MA NETWORK CONFIGURATION, select device and press button
EXPORT CONFIGURATION.
Select drive. Internal ( onPC or console) or External (name of USB-flash drive)
Type file name and press SAVE or CANCEL (abort).
Load Configuration /settings
Open menu SETUP / NETWORK /MA NETWORK CONFIGURATION, select device and press button
IMPORT CONFIGURATION.
Select drive. Internal ( onPC or console) or External (name of USB-flash drive)
Select file and press OPEN or CANCEL (abort).
If you have integrated additional MA 8Ports into the Show or exchanged a MA 8Port, after having saving the
configuration, these MA 8Ports will not be taken into account when loading this configuration (even if the IP
address wasn't changed). You will first have to configure these „new" MA 8Ports and then create a new
configuration file using EXPORT CONFIG.
MA 8Port Node
Data
Transport
Safety
instructions
Safety and
environmet
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
41