Xindao XD P410.55X Gebrauchsanleitung Seite 4

3. Count steps
The step counts can be displayed to five digit numbers starting from 0 to
99999. Press "MODE" (again) to check the step counts. Hold the button "SET"
to reset the step counts to zero (again). Press "MODE" again to switch from
displays and functions.
4. Step distance
The distance is displayed in KM. Hold the button "SET" and then press on
"MODE" to adjust the correct personal length (you can adjust starting from 30
to 200cm). Please note: will add 5CM each time you press on "MODE". Then
press "SET" to confirm. To reset the distance in KM, you will need to reset the
step to zero. (See above point 3. Count steps of how to reset).
Switch from KM to Miles and vice versa
Press and hold the "mode" button until this pedometer gives a reset. You will
find the changes after when going back to the distance display (by pressing
the mode button).
5. Weight setting
To adjust your weight, please press "MODE" until the pedometer bracelet
shows the calories. Hold the button "SET" and then press "MODE" to adjust
your weight ((you can adjust starting from 30 to 120). Then press "SET" to
confirm. ). Please note: will add 2KG each time you press on "MODE". To reset
the distance in KM, you will need to reset the step to zero. (See above point 3.
4