Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Before we connect the camera to the DVR you first must choose on which channel you want the camera.
You can see this in the bottom table. There you can select one of the four channels with left mouse
button
•
Now you can connect the camera to the DVR by searching in the top right for "Match Code" and click on it
with the left mouse button. The loading can take a minute.
•
When this is completed you will see on the background of the screen that one of the four channels of the
split screen has an image.
•
If you now disconnect the network cable connected to the camera and the DVR then the camera will work
on a WIFI signal but this can take a moment. But you will have to connect the antenna to the camera and
the DVR.
•
Now the camera will use WIFI.
4
Werbung
