switel HS 2000 Bedienungsanleitung Seite 16

Main Screen
Recording Setup
System Settings
Motion Detection
Settings
Firmware Upgrade
ADDING NEW CAMERAS
Your monitor supports a total of four active cameras at a time. When you add a camera, you have to pair it
to the monitor (that is, you have to "introduce" the camera and monitor to each other so they can
communicate).
• If a camera is already assigned to the channel you want to assign the new camera to, the monitor
overwrites the existing camera link with the new one.
• Only pair one camera at a time! The monitor links to the first camera it detects. If two or more camera
are in pairing mode, you can't control which camera the monitor will detect first.
PAIR CAMERAS
1 From the Pairing Camera screen, tap the camera image you want to pair. A processing icon displays
for a 30 second countdown.
2 During the 30 second countdown, quickly press and release the Pairing button on the camera.
3 The system automatically adjusts the Live View screen accordingly.
14
Sub-Screen
Duration
Schedule Recording
File Overwrite
Date & Time
Language
Default Settings
Format Memory Card
Information
A single screen lets you set motion detection sensitivity for each camera.
It also lets you determine which viewing areas for each camera should be
masked from motion detection.
In case of a new firmware you can perform an update. Download the file from
the website to a SD card, put it into the device and follow the instructions on the
screen.
What it Does
Set the length of time the camera records once
motion sensitivity triggers the camera to record.
Choices are 15 seconds, 30 seconds, or 1 minute
(Default - 15 seconds)
Set up a schedule for pre-determined recording times
and lengths.
Overwrites the oldest recorded data on the SD card
once the card is full.
Set the current time.
Changes languages setting for the monitor
Restores the system to default settings.
Reformats the SD card and deletes all existing data.
Displays firmware information for the monitor and
each camera.