Set Sleep Mode; Set Language; Reset To Factory Defaults - HP df840p3 Bedienungsanleitung

Connect DPF to Macintosh Computer
1. Use a USB cable to connect the DPF to your Macintosh computer.
2. Macintosh will recognize the DPF as an external storage device.
3. Drag and drop files between the two devices as you normally move files.
Disconnect DPF from Macintosh Computer
1. To safely disconnect the DPF from your Macintosh, select DPF's icon on your desktop and press
eject the disk.
2. When the icon is no longer on the desktop, it is safe to unplug the USB cable.
Set Sleep Mode
The DPF will stay on until you power it off, however, to save power you can set it to automatically go into a sleep mode
when left idle for a specific amount of time.
HOME
1. On the screen, press

Set Sleep Mode

2. Select
OFF (default) = Power saver is 'disabled'; DPF will remain on until you power it off or change the sleep mode setting
2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the specified amount of time
3. Select .
Done
Set Language
Depending on model, this DPF may include multiple languages for the user interface display.
HOME
1. On the screen, press

Set Language

2. Select
Reset to Factory Defaults
If you have changed function settings, using this feature will restore all settings to the factory pre-set defaults.
HOME
1. On the screen, press
2. Select
Reset to Factory Defaults
3. Press to return to the
16
to display the
, and then select the desired setting.
to display the
, and then select the desired language.
to display the
, and then select
HOME
screen.
Setup Menu
.
Setup Menu
.
Setup Menu
.
to reset, or to leave current settings.
Yes No
to
Command‐e