Removing The Transportation Locks; Connecting Water Supply - Beko WTV 7832 X00 Bedienungsanleitung

2.3 Removing the transportation locks

A
WARNING:
Do not remove the transportation locks
before taking out the packaging reinforcement.
WARNING:
Remove the transportation safety bolts
before operating the washing machine! Otherwise, the
product will be damaged.
1. Loosen all the bolts with a suitable spanner until they
rotate freely (C) .
2. Remove transportation safety bolts by turning them
gently.
3. Attach the plastic covers supplied in the User Manual bag
into the holes on the rear panel. (P)
C
NOTE :
Keep the transportation safety bolts in a safe
place to reuse when the washing machine needs to be
moved again in the future.
NOTE :
Never move the product without the
transportation safety bolts properly fixed in place!
5 / EN

2.4 Connecting water supply

C
NOTE :
The water supply pressure required to run the
product is between 1 to 10 bars (0.1 – 1 MPa). It is
necessary to have 10 – 80 liters of water flowing from
the fully open tap in one minute to have your machine
run smoothly. Attach a pressure reducing valve if water
pressure is higher.
NOTE :
If you are going to use the double water-inlet
product as a single
install the supplied stopper to the hot water valve before
operating the product. (Applies for the products supplied
with a blind stopper group.)
A
WARNING:
Models with a single water inlet should not
be connected to the hot water tap. In such a case the
laundry will get damaged or the product will switch to
protection mode and will not operate.
WARNING:
Do not use old or used water inlet hoses
on the new product. It may cause stains on your laundry.
1. Connect the special hoses supplied with the product to
the water inlets on the product. Red hose (left) (max. 90
ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is
for cold water inlet.
A
CAUTION:
Ensure that the cold and hot water
connections are made correctly when installing the
product. Otherwise, your laundry will come out hot at the
end of the washing process and wear out.
(cold)
water-inlet unit, you must
Washing Machine / User's Manual