Gb Manual For Access Usb/Keyboard Interface; Ntroduction; Interface Description - Gewa Access Gebrauchsanleitung

GB Manual for Access USB/Keyboard Interface

Introduction
ACCESS USB/KEYBOARD INTERFACE enables wireless data
communications with infrared light to a personal computer. The interface is a
receiver that takes in IR signals and converts them so that the computer can
understand what has been transmitted. Data communications can be for both
keyboard and mouse functions.

Interface Description

Transfer of keyboard data is accomplished with Gewa's special IR codes for
keyboard and mouse data. These codes can be generated by the following IR
transmitter models:
Gewa Prog III Module, Gewa Prog III Micro Module, and the Access Medi and
Access Maxi keyboards.
There are normally two ways of controlling mouse functions on a computer:
1. By moving a conventional mouse in different directions.
2. By pressing the keys on the numeric section of the computer's keyboard.
(NOTE: Mouse keys must be activated by Windows settings.)
Depending on how the interface is connected to the computer, it can simulate
mouse control in one (via a keyboard port) or both (via a USB port) of these
ways.
11