Operating The Appliance; Einschalten Und Temperatur Einstellung; Timer; Switching Off - Caso FonDue white Original Bedienungsanleitung

► Switch the appliance off after use. This avoids unnecessary use of energy, and ensures
your safety.
► If the appliance is unused for extended periods of time, we recommend that the
appliance be unplugged from the mains.

14.3 Operating the Appliance

14.3.1

Einschalten und Temperatur Einstellung

• Plug the power plug into a suitable outlet.
• The temperature of the cooker plate surface displayed: is the temperature of the
surface of the induction cooker lower than 50°C, the display shows „-L-". When the
temperature of the cooker plate surface is over 50 °C, it is displaying „-H-". An
acoustic signal sounds. Now the device is in standby mode.
• Place the cookware on the hotplate.
• Press "On/Standby" once, LED display shows "---". Now it is ready for cooking.
• Press function key TEMP once.
• The preset temperature stage "120°C" is selected and the device turns on.
• With the + / - keys, you can change the settings at any time in a range from 60 –
240°C. (Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C)
14.3.2

Timer

• Timer Function. After the selection of the temperature then press function key
TIMER once. The display shows the number "0".With +/- keys, you can now select
the operating time in 1-minute intervals (up to max. 180 minutes).
• Once the time is up, an acoustic signal sounds and the device automatically goes
into standby mode.
Please note
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
14.3.3

Switching Off

• When you switch off the device via "On/Standby" and the temperature of the cooker
plate surface is lower than 50°C, the display shows „-L-". When the temperature of
the cooker plate surface is over 50 °C, it is displaying „-H-".
• During operation, remove the cookware, the device shall be an acoustic signal
sounds for 15S, then on "stand-by" mode.
caso Vario Power 3400 39