Cleaning And Maintenance - BOMANN DU 770 G Bedienungsanleitung

Cleaning

Cleaning and Maintenance

Cleaning Cleaning
WARNING: WARNING: WARNING: WARNING:
• Always turn off the appliance and disconnect from
the power supply before cleaning and user
maintenance.
• Allow the appliance cool down sufficiently!
• Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock! Risk of electric shock! Hot steam could damage Risk of electric shock! Risk of electric shock!
the plastic parts.
• The appliance must be dry before restarting oper-
ation.
CAUTION: CAUTION: CAUTION: CAUTION:
• Do not use a wire brush or other sharp, abrasive
items.
• Do not use any acidic or abrasive cleaners.
Maintenance of the hood Maintenance of the hood Maintenance of the hood Maintenance of the hood
• To clean the surface of the housing, use a mild
detergent and a soft cloth to prevent scratching.
• The appliance can be used again after everything
has dried properly.
• If you use your cooker hood in recirculation mode,
you must replace the activated carbon filter regu-
larly (see "Replacing the activated carbon filter").
Cleaning the aluminum grease filter Cleaning the alum inum grease filter
Cleaning the alum Cleaning the alum inum grease filter inum grease filter
WARNUNG: Risk of fire! WARNUNG: Risk of fire! WARNUNG: Risk of fire! WARNUNG: Risk of fire!
Grease residue in aluminum grease filter may ignite
at intense heat. Therefore, clean the grease filter
regularly!
We recommend cleaning the grease filter monthly:
• Remove the aluminum grease filter by sliding
back the lock in the handle recess, push the filter
down gently and pull out towards the front.
• Rinse the grease filter in a solution of hot water
and neutral detergent. Soak the filter in it.
• Then clean with a soft brush, rinse thoroughly with
hot water and allow drying.
and Maintenance
and Maintenance and Maintenance
• Alternatively, the grease filter can also be cleaned
in the dishwasher (up to 60°C). Slight discolora-
tion may occur. This does not affect the function
of the grease filter.
Replacing the activated carbon filter Replacing the activated carbon filter Replacing the activated carbon filter Replacing the activated carbon filter
The activated carbon filter prevent odors and must
depend on the use, but be changed at least every six
months.
Order the carbon filter from your dealer or in our
online accessories shop,
reference number found under "Technical Data".
• See "Installing the activated carbon filter for recir-
culation mode".
• Remove the old carbon filter by turning the filter
anti-clockwise.
Replacing Replacing the bulb the bulb
Replacing Replacing the bulb the bulb
WARNING: WARNING: WARNING: WARNING:
Allow the lamps to cool down before replacing the
bulbs. Risk of burns! Risk of burns! The LED lamp must be re- Risk of burns! Risk of burns!
placed by a qualified person.
NOTE: : : : NOTE NOTE NOTE
Oder the lamps from your dealer or in our online
accessories shop www.bomann.de www.bomann.de www.bomann.de www.bomann.de.
L L L L amp specification: amp specification: LED, 2 x 1 amp specification: amp specification:
• Remove the aluminum grease filter.
• Open the black protective housing of the plug-in
connection with a suitable tool.
• Press out the lamp unit gently from the inside and
disconnect it from the connector.
• Connect the new bulb with the connector properly
and close the protective housing.
• Reinsert the lamp unit into the lamp socket until it
clicks into place.
• Replace the aluminum grease filter.
20
www.bomann.de. Use the www.bomann.de
www.bomann.de www.bomann.de
LED, 2 x 1.5 .5 .5 .5 W W W W LED, 2 x 1 LED, 2 x 1