Werbung
TIME <4
ALARM 1-5
FAST UP c
ALARM 2 7
SLOWDOWN!
RADIO ON/
SLUMBER 6
CLOCK DISPLAY
IMPORTANT NOTES FOR USERS IN THE U.K.
Mains plug
This apparatus is fitted with an approved moulded 13 Amp plug To change a fuse
in this type of plug proceed as follows:
• Remove fuse cover and fuse.
new fuse which should be a BS1362 5 Amp, A S T.A or BSI approved type
• F
ix
• Refit the fuse cover
If the fitted plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5 Amp If a plug
without a fuse is used, the fuse at the distribution board should not be greater
than 5 Amp.
Note: The severed plug must be disposed to avoid a possible shock hazard should it be inserted into a
13 Amp socket elsewhere
How to connect a plug
The wires in the mams lead are coloured with the following code, blue = neutral (N), brown = live (U
As these colours may not correspond with the colour markings identifying the terminals in your plug,
proceed as follows.
• Connect the blue wire to the terminal marked N or coloured blue or black
• Connect the brown wire to the terminal marked L or coloured brown or red
• Do not connect either wire to the earth terminal in the plug, marked E (or i) or coloured green (or
green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead
- not simply over the two wires.
If in doubt, consult a qualified electrician.
(T RADIO ON/OFF
,
) ALARM switch 2
2
(3) ALARM switch 1
15 SLUMBER OFF/
REPEAT ALARM
ij BATTERY
Compartment
Werbung
