Making A Call (Voice Dialling); Rejecting A Call - AUDIOLINE Car Kit BT 201 Bedienungsanleitung

5.3

Making a call (voice dialling)

It is possible to make a call without having to enter the call number. To do this, the corresponding
voice command must be recorded on the mobile phone. Refer to the operating manual provided
with the mobile phone for further information on this topic.
1. If the car kit is in Standby mode (blue LED flashing), press the Multifunction button.
2. After receiving a confirmation signal, speak the voice command stored in the mobile phone
for the person to be called.
3. When the voice command is found in the mobile phone, the car kit announces this voice
command and then dials the corresponding call number.
4. When the call starts, a timer is started and the duration of the call
appears in the LC display.
5. To end the call, simply press the Multifunction button again.
5.4

Rejecting a call

When a call is received, the car kit issues an acoustic signal. The
number of the caller appears in the LC display.
1. Press the Multifunction button for approx. 2 seconds until you hear
an acoustic signal. The call is rejected.
34
- Operation -
05:30
05926036442