The Audac PRE16/26 stereo preamplifiers are designed to be used in combination with the Audac D, T, Q and CPA Series Amplifiers, but can also be used for various other applications. It has 2 balanced XLR microphone inputs which are both equipped with a gain control, a 3-band tone control, phantom power and a talk over function.
Chapter Environment Do not place this unit in an enclosed environment such as a bookshelf or closet. Ensure that there is adequate ventilation to cool the unit. Do not place the unit in environments which contain high levels of dust, heat, moisture or vibration.
Safety Requirements Always handle the unit with care. Only use a grounded socket outlet and a power cord with grounding plug to plug in the unit. This unit is not a toy. It should not be operated by children. Do not stick objects through the openings. Do not open the unit (risk for electrical shock).
With this knob, the overall volume of the corresponding output channel can be adjusted. 8. Power button and power indicator LED: The power switch has to be used for turning the device on/off. A blue power indicator LED lights up when the PRE16/26 is turned on.
These unbalanced line level inputs can be connected to equipment with unbalanced line level outputs. A gain control potentiometer is provided to control the level of the input signal. There are three stereo unbalanced line inputs available on the PRE16/26. 10. Balanced stereo line input: The balanced stereo line input allows connecting a music source with balanced line outputs.
Chapter Connections and Connectors The in- and output connections of AUDAC audio equipment are performed corresponding to international wiring standards for professional audio equipment. Cinch (RCA): tip = signal (left or right) ring = ground XLR: 1 = ground / shield...
The volume of the input signals can be controlled by turning the volume knobs of the input signals on the front panel of the PRE16/26. The master volume knob and the 2 band tone control knobs allow you to adjust the volume, bass and treble of the output signal. A VU-bar indicates the...
Dieser Abschnitt gibt einen kurzen Überblick über die Ausstattungsmerkmale des PRE16/26 Vorverstärkers. Der PRE16/26 Vorverstärker wurde entwickelt wie eine benutzerfreundliche, flexible Lösung für multifunktionale Verwendung. Während der Entwicklung des PRE16/26 wollten die AUDAC Ingenieure zum 4 Ziele kommen: Eine flexible Audio Lösung lancieren um mehrfache Funktionen zu kontrollieren. Benutzerfreundlichkeit.
Umgebung Stellen Sie den Apparat nicht in einer abgeschlossenen Umgebung wie ein Büchergestell oder einen Schrank. Sorgen Sie für ausreichende Ventilation um den Apparat ab zu kühlen. Stellen Sie diesen Apparat nicht in einer Umgebung wo es viel Staub, Hitze, Feuchtigkeit oder Vibration gibt. Benutzen Sie den Apparat nicht dicht zu Wasser oder andere Flüssigkeiten.
Sicherheitshinweise Hantieren Sie diesen Apparat immer mit Sorge. Gebrauchen Sie nur eine Steckdose mit Erdung und ein Stromkabel mit einem Stecker mit Erdung um den Apparat ein zu schalten. Dieser Apparat ist kein Spielzeug. Kinder dürfen es nicht bedienen. Stechen Sie keine Gegenstände in den Öffnungen. Machen Sie den Apparat nicht auf (Risiko auf Stromschlag).
7. Haupt Lautstärke Kontrolle: Mit diesem Knopf kann man die allgemeine Lautstärke des ähnlichen Ausgangskanals anpassen. 8. Stromknopf und LED Stromindikator: Der Stromschalter muss man anwenden um das Gerät ein/aus zu schalten. Wenn der PRE16/26 eingeschaltet ist wird einen Blauen LED Indikator erleuchten.
Linie Niveau Ausgänge. Einen Verstärkungskontrolle Potentiometer ist ausgestattet um das Niveau des Eingangssignals zu kontrollieren. Es gibt 3 Stereo unbalancierte Linie Eingänge auf den PRE16/26. 10. Balancierte Stereo Linie Eingang: Der balancierte Stereo Linie Eingang erlauben Sie eine Musikquelle mit balancierte Linie Ausgänge zu verbinden.
Verbindungen und Anschlüsse Die Ein-und Ausgänge der Verbindungen der Audac Audio Equipment funktionieren ähnlich den internationalen Verdrahtung Richtlinien für professional Audio Equipment. Cinch (RCA): Tip = Signal (links oder rechts) Ring = Erdung XLR: 1 = Erdung, Schutz 2 = + sig...
Sich an die Arbeit machen Der PRE16/26 kann man einschalten wenn man drückt auf den Stromknopf auf die Frontblende. Der blaue ‚EIN‘ LED wird erleuchten wenn Sie das Gerät einschalten. Jeder Kanal hat einen Clip LED Kontrollelämpchen auf die Frontblende, so können Sie die Eingangsniveaus kontrollieren.