Week Function; Special Functions - Vestamatic Rollmat Plus G/S V3.1 Montageanleitung Und Bedienungsanleitung

Week function

The week function enables you to program a particular up and
down time for each individual day of the week.
In order to activate the week function, all DIP switches in the rear
of the housing must be set according to the table on page 61.
The following times were preset for this operation mode by the
manufacturer:
· Up time Monday through Friday
· Down time Monday through Friday – 2ß0:0ß0
· Saturday / Sunday – no preset time.
If you wish different up or down
times, perform the following
steps:
Press the day button. The display
will show a new day of the week
after every press.
Perform the steps described on page 50 to 51 to program the
up and down times for the currently displayed day.

Special functions

– 0ß6:0ß0
(QS8:0ß0)
(0w8:0ß0)
... etc.
- 53 -
Special functions
The Astro function is basically an electronical calendar. Depend-
ing on the stored sunrise and sunset times, the up or down
times are automatically corrected under consideration of the
geographical location of your residence. This correction is
based on the up or down times you previously set.
For more information on the programming of the Astro function
please see page 56.
Example:
You have activated the Astro function and previously pro-
grammed the following up and down times according to the
instructions on page 50 and page 51:
Up time
Down time – 1ß9:3ß0 (½ an hour before sunset according to
Given the current calendar week 14.
In this example, the roller shutter does not move up at 6:30, as
programmed but moves up at 7:00 when the sun rises.
In the evening, it moves down at 19:30 at the programmed time.
G G
– 0ß6:3ß0 (½ an hour before sunrise according to
the diagram on page 57)
the diagram on page 57)
- 54 -
Astro function