Automatic Mode; Basic Functions; General - Vestamatic Rollmat Plus G/S V3.1 Montageanleitung Und Bedienungsanleitung

Automatic mode

Push the selector switch to (A), all the way to the left until you
hear the "click" in order to activate the automatic mode.
The automatic mode is now activated and the roller shutter will
move up and down at the programmed times. Regardless of the
programmed times, it is still possible to move the roller shutter
up and down by pressing the up or down button and the pro-
gramming remains unaffected.
If you press the up or down button longer than 2 seconds, the
roller shutter moves up or down.
Simply press the opposite button to stop the motion, i.e.:
· press the down button, if the roller shutter is moving up,
· press the up button, if the roller shutter is moving down.
The roller shutter will only move up or down again after the up
or down button has been pressed.
By simply pushing the selector switch to manual mode (H), the
automatic mode can be interrupted for an extended period of
time.
After selecting the automatic mode again, the Vestamatic Rollmat
Plus G/S V3.1 roller shutter control will execute the last pending
command from the automatic mode. The last pending command
will also be executed when resetting after power failure.
Introduction
- 45 -

Basic functions

After the installation has been completed correctly (for instruc-
tions please see pages 67 to 74), you can start programming.
Important: Please note that the Vestamatic Rollmat Plus G/S
Carefully pull to remove the cover cap and press the reset button
with the delivered adjustment tool or something else suitable.
Pressing the reset button will activate the default times prepro-
grammed by the manufacturer.
· Current time – 0ß8:0ß0
· Up time –
· Down time –
On the following pages, you will find instructions how to cus-
tomize these times to your personal requirements.
G G
V3.1 roller shutter control cannot be programmed in
case of power failure.
0ß6:0ß0
2ß0:0ß0
- 46 -

General