Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remove contents from box. Remove the foam separators that protect the components from
damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have
occured during shipping. Because the scooter is 95% assembled and packed at the factory,
there should not be any problems, even if the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED -OFF- BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
ESTIMATED ASSEMBLY AND SET-UP TIME
Allow up to 20 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge.
SAFETY- & SOFT start function
This scooter model has a socalled soft start system. In order to activate the throttle the scooter
has been kicked as a normal kick scooter for a few metres which automatically activates the
throttle which then can be used from a speed of approx 3 km/h. Should the scooter be stopped
completely repeat same procedure to start rinding it.
GEbrAUchANwEIsUNG
BEFORE YOU BEGIN
3
INsTrUcTIoNs
3
sxT-scooTErs
sxT-scooTErs
WARNING:
DO NOT USE NON-
ORIGINAL PRODUCTS
WITH YOUR ELECTRIC
SCOOTER.
The scooter has been
built to certain design
specifications. The original
equipment supplied at
the time of sale was
selected on the basis of
its compatibility with the
frame, fork and all other
parts. Certain aftermarket
products may or may not
be compatible.
Werbung
Inhaltsverzeichnis
