Using Bluetooth - Samsung 5.1CH Blu-ray HT-H5500 Bedienungsanleitung

To show the RDS signals
You can see the RDS signals the station sends on the
display.
Press the RDS DISPLAY button while listening to an
FM station.
• Each time you press the button, the display change
to show you the following information : PS NAME
 RT  CT  Frequency
While searching, <PS NAME>
appears and then the station
PS (Program
names will be displayed.
Service)
<NO PS> appears if no signal is
sent.
While searching, <RT> appears
and then text messages the
RT (RadioText) station sends will be displayed.
<NO RT> appears if no signal is
sent.
Station frequency (non-RDS
Frequency
service)
About characters shown in the display
When the display shows PS,or RT signals,the
following characters are used.
• The display window cannot differentiate upper case
and lower case letters and always uses upper case
letters.
• The display window cannot show accented letters,
<A,> for instance, may stands for accented <A's>
like <À, Â, Ä, Á, Å and Ã.>
PTY (Program Type) indication and
PTY-SEARCH function
One of the advantages of the RDS service is that
you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
To search for a program using the PTY codes
• Before you start!
- The PTY Search is only applicable to preset
stations.
- To stop searching any time during the process,
press 5 button while searching.
- There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
- When pressing the buttons on the primary
remote control, make sure that you have selected
the FM station using the primary remote control.
RDS DISPLAY
1
PTY -
4
1. Press the PTY SEARCH
to an FM station.
2. Press the PTY-
code you want appears on the display.
• The display gives you the PTY codes
described to the right.
3. Press the PTY SEARCH
PTY code selected in the previous step is still on
the display.
• The centre unit searches 15 preset FM
stations, stops when it finds the one you have
selected, and tunes in that station.

Using Bluetooth

You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect with each other
easily using a short, wireless connection.
• A Bluetooth device may hum or malfunction:
- When a part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Home Cinema.
- When it is subject to electrical variation from
obstructions caused by a wall, corner, or office
partitioning.
- When it is exposed to electrical interference from
same frequency-band devices including medical
equipment, microwave ovens, and wireless
LANs.
• Pair the Home Cinema with the Bluetooth device
while the two are close together.
33
- English
+
TA
2 3
PTY SEARCH PTY +
5 6
button while listening
or PTY+ button until the PTY
button again, while the