Setting (Resetting) Date And Time; Setting And Storing Personal Data In Memory - Tanita BF-683W Bedienungsanleitung

GB
SETTING ( RESETTING ) DATE AND TIME
1. Set Year
Press and hold the Down/
the Up/Down buttons to set year and then press SET button.
The unit will beep once to confirm.
2. Set Month
Press the Up/Down buttons to set month and then press the SET button.
The unit will beep once to confirm.
3. Set Day
Press the Up/Down buttons to set day and then press the SET button.
The unit will beep once to confirm.
4. Set Hour
Press the Up/Down buttons to set hour and then press the SET button.
The unit will beep once to confirm.
5. Set Minute
Press the Up/Down buttons to set minute and then press the SET button.
The unit will beep twice to confirm the program. The unit will then shut
down automatically.
Note:
• If you change the date to any day prior to the original date, tracking data
for all users will be lost.
• After you replace the batteries, press and hold the Down/
and time programming process. Replacing the batteries will cause the loss of date and
time settings.
• 60 seconds or more of inactivity will cause automatic shut off during this process.
No data will be saved as a result.
• If you make a mistake or wish to turn the unit off before you complete the
programming, press the OFF button to turn the unit off. No data will be saved as a
result.
6
button for 3 seconds to turn on the unit. Press
button to begin the date

SETTING AND STORING PERSONAL DATA IN MEMORY

You will receive readings only if data has been programmed into one of the personal data memories or the Guest mode.
The monitor can store personal details for up to 4 people.
1. Turn on the Power
Press the Set button to turn on the unit (once programmed, tapping a
Personal Key turns on the unit.) The unit will beep to confirm activation, the
Personal Key numbers (1,2,3,4) will be displayed, and the display will flash.
Note: If you don't operate the unit for sixty seconds after the unit has been turned on, the unit
will turn off automatically.
Note: If you make a mistake or want to turn the unit off before you have finished
programming it, press the Weight-Only Key ( ) to force quit.
2. Select a Personal Key Number
Press the Up/Down buttons to select a Personal Key. Once you reach the
Personal Key number you wish to use, press the Set button. The unit will
beep once to confirm.
3. Set your Birthday
Set the date of your birthday (Year / Month / Day) using
Up/Down buttons.
Press the SET button to confirm at each programming.
The unit will beep once to complete the programming
.
Note: The range of year is from 1900 – 2050.
4. Select Female or Male
Use the Up/Down buttons to scroll through Female ( ) or Male ( ),
Female/Athlete ( / ) and Male/Athlete ( / ) settings, then press the Set button.
The unit will beep once to confirm.
5. Specify the Height
The display defaults to 5' 7.0" (170cm) (range of user is from 3' 4.0" – 7'
3.0" or 100cm – 220cm). Use the Up/Down buttons to specify Height and
then press the Set button. The unit will beep twice and the display will flash
all data (Male/Female, Age, Height, etc.) one time to confirm the
programming. The power will then shut down automatically.
Note: When you change the birthday and/or gender, the unit will show "CLEAR".
If you select "YES" using Up/Down buttons, the existing personal data and tracking
data will be deleted.
If you select "NO" using Up/Down buttons, no new data will be saved (Existing data will
be unchanged) then the unit will be shut off.
GB
7