The Display - Citizen SRP-265N Anweisungshandbuch

[ DATA ], [ DEL ] Data Entry and Delete Key
In the STAT mode, enter data by pressing the desired numbers, then
[ DATA ]. If you enter incorrect data and do not notice your mistake
until you press [ DATA ], enter the same incorrect data and then press
[ DEL ] to delete that incorrect data.
[ x ] Arithmetic Mean Key
Calculates the arithmetic mean ( x ) of the data.
[ 2ndF ] [ σ ] Population Standard Deviation Key
Calculates the population standard deviation of the data.
[ S ] Sample Standard Deviation Key
Calculates the sample standard deviation of the data.
2
[ 2ndF ] [ Σ x ] Sum of Square Value Key
Calculates the sum of the square value ( Σ x
[ 2ndF ] [ Σ x ] Sum of Value Key
Calculates the sum of the value ( Σ x ) of the data.
[ n ] Number of Data Key
Displays the number of data (n) entries.

The Display

Indicators showed on the display to indicate you the current status of
the calculator.
• Floating point displays up to 10 digits.
• The mantissa section displays up to 8 digits. the exponent section
displays up to ± 99.
STAT : Indicates the statistical mode.
M : Indicates that a value is stored in memory.
– : Appears to the left of the mantissa or exponent to
indicate that the respective value is negative.
E : Indicates an error.
PGM : Indicates the program learn mode.
CONST : Indicates the constant mode.
GRAD : Indicates the gradient units have been selected.
RAD : Indicates that radian units have been selected.
DEG : indicates that degree units have been selected.
BUSY : While an operation is executing.
: Indicates the deviation value
σ
2F : Appears when the second function has been
selected.
HYP : Appears when the hyperbolic function has been
selected.
( : Appears when you press [ ( ]. It shows the
present level of nesting.
SR260C_English_black_090402.doc
2
) of the data.
-E7-
SIZE: 140x75mm SCALE 2:1
2009/4/15