zoopa Q155 roonin Bedienungsanleitung Seite 16

How to insert and connect the battery
As soon as the battery is fully charged, please insert it into the case that is located underneath the
model.
Do not connect the battery yet.
Switch on the controller. The Power LED will start to flash. Place the zoopa Q155 roonin on an even
surface. Now connect the battery to the zoopa Q. The LED of the model switches on. Now move up
the gas stick (left) until it's end position and move it down again. Controller and model are now paired.
Check the polarity before you connect the battery !
First tries and flight advices
Before you start your first flight tests, make sure that there are no other people or animals around.
Keep an area of 3x3 meters free!
The orange blades show the front side of the model. The black blades show the tail of the
quadrocopter. The different colors provide a simple orientation during flight.
Power the gas slowly to test all functions at the beginning.
Rise / Descent
Move up the gas stick (left) to lift the model and move
it down to let it sink.
Move the Controllstick (right) to the left or right, to let
the model pan to the left and right.
www.acme-online.de
Right / Left
ACME the game company