Pairing The Headset With A Bluetooth Transmitter; Reconnecting With A Bluetooth Device - I.onik entertain BTH-033 Kurzanleitung

note:
- If pairing fails, please turn off the headset first and then
repair according to steps 1-6 above.
- Once pairing is successful, the headset and the mobile phone
will remember each other; there will be no need to repair
next time. The headset can remember 8 paired devices. When
the number of paired devices exceeds 8, the first one will be
replaced.
- Every time the headset is turned on, it will connect to the
last connected device automatically. If you want to pair it
with other devices, turn off the Bluetooth function of the last
connected device then pair the headset with the new device,
following steps 1-6 above.

3) Pairing the Headset with a Bluetooth Transmitter

You can connect the headset to a Bluetooth transmitter, to
enjoy music wirelessly. Take a BTT010 (Bluetooth transmit-
ter for iPod and iPhone - not included), for example. The
pairing steps are as follows:
1) Keep your headset and phone within 1 metre when
pairing.
2) Set the headset to enter pairing mode (refer to "How to
enter pairing mode").
3) Turn on the Bluetooth transmitter. It will search for Blue-
tooth devices automatically and send a pairing request.
4) When the headset requests you to enter a PIN number,
the transmitter will respond "0000" automatically.
5) After successful pairing and connecting, the blue LED
indicator on the headset flashes twice every 4 seconds.
26
BTT010
(Fig. similar.
Not included.)
note:
- The pairing password of the headset is "0000". The headset
can, therefore, only pair with a Bluetooth transmitter whose
pairing password is "0000".
- If pairing still fails after several tries, refer to the Bluetooth
transmitter user's manual for further information.
4) Multi-pairing
The headset can connect with two devices at most. One is a
Bluetooth mobile phone supporting a HFP profile; the other
one is a Bluetooth music device supporting an A2DP profile.
If you want to finish the multi-pairing, proceed as follows:
1) Firstly, pair the headset with a Bluetooth transmitter
(refer to "Pairing the headset with a Bluetooth trans-
mitter").
2) Turn off the Bluetooth transmitter.
3) Pair and connect the headset with a Bluetooth mobile
phone (refer to "Pairing the headset with a Bluetooth
mobile phone").
4) Turn on the Bluetooth transmitter; it will connect to the
headset automatically.
note:
- After successful multi-pairing, the paired devices will remem-
ber each other. You will not need to pair next time. If the
pairing information is deleted, connect the mobile phone with
the headset and then turn on the Bluetooth transmitter. Multi-
connecting can be performed.
- For a mobile phone supporting the HSP and A2DP at the same
time, you may set up a HSP and A2DP connection with the
headset simultaneously. At this time, the Bluetooth transmit-
ter must not be connected to the headset.

3. Reconnecting with a Bluetooth Device

1) Automatic connecting
Every time the headset is turned on, it will connect to the
last connected device automatically.
27