Daily Inspection - Ransomes LKCB104 Handbuch

7.1 DAILY INSPECTION ____________________________________________________

1. Perform a visual inspection of the entire unit, look for signs of wear, loose hardware and missing or
damaged components. Check for oil leaks to ensure connections are tight and hoses and tubes are in
good condition.
2. All fluids must be at the full mark when cold.
3. Make sure all cutting units are adjusted to the same height of cut.
CAUTION
The Daily Inspection Should Be
Performed Only When The Tractors
Engine Is Off And All Fluids Are Cold.
Lower Implements To The Ground,
Engage Tractors Parking Brake, Stop
Engine And Remove Ignition Key.
7 OPERATION
en-21