Connecting To The Internet - Archos Arnova 8 Handbuch

coNNEctiNg to tHE iNtERNEt

www
First of all, you need to configure a WiFi network. For this procedure to work, you need to be in a WiFi zone that will allow
you to connect to it. Every time the ARNOVA is in range of a network that you have already configured once, it will at- -
tempt to make a connection.
To configure a new WiFi network, go on the Home screen, tap on the Menu icon
1
Settings
select .
Settings
2 In the screen, select
networks .
3
If the WiFi is off, tap on the
will scan for available WiFi networks and display them at the bottom of the screen.
4
Tap on the network you want to connect to, enter the required network information* and then tap on
will now attempt to establish a connection to that WiFi hot spot with the network parameters you entered.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters)
of the type WEP, WPA, or WPA2.To obtain the exact connection parameters required, contact the Internet service provider .
6
Wireless &
Wi-Fi line to turn it on. Then select
, then
Wi-Fi settings . The ARNOVA
Connect . Your ARNOVA