Change Aspect Ratio; Noise Reduction; Pc Picture Settings - AEG CTV 2205 LED-DVB-T Bedienungsanleitung

5. Press to access the desired item and set the value with the arrow buttons / .
6. Press the TV MENU button to access the complete picture menu for further changes.
7. Press EXIT to exit the menu and save the changes.
Set Colour Temperature
Your TV set comes with 3 preset and one manually adjustable colour temperature settings (Cold, Medium, Warm and
User).
1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button
3. Press to highlight the item Colour Temperature. Press OK to display the menu.
4. Press / to select the item User. The following items are activated and can be changed: Red / Green / Blue.
5. Press to access the desired item and set the value with the arrow buttons / .
6. Press the TV MENU button to access the complete picture menu for further changes.
7. Press EXIT to exit the menu and save the changes.

11.2 Change Aspect Ratio

Your TV set comes with 5 aspect ratios: Choose the suitable option by pressing the
1. Press ASPECT once to display the current setting.
2. Press ASPECT again to change the setting.

11.3 Noise Reduction

This function reduces the noise and increases the image quality with weak signals.
1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button
3. Press the arrow button
4. Select between the settings: Off, Low, Medium, High and Auto. Press
confirm.
5. Press EXIT to exit the menu and save the changes.

11.4 PC Picture Settings

If a PC is connected to your TV set and PC is selected as signal source in the PICTURE menu, the item Screen can be
selected. Set position and synchronisation for desktop here.
1. Press the TV MENU button to display the OSD main menu.
2. Select the PICTURE menu.
3. Press the arrow button
4. Press the arrow button
- Horizontal Pos. (horizontal desktop position)
- Vertical Pos. (vertical desktop position)
- Size
- Phase (synchronisation)
5. Set the value with the arrow buttons / .
6. Press EXIT to exit the menu and save the changes.
Define Picture Mode
1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button
3. Press
menu.
4. Press / to select item User. The following items are activated and
can be changed.
Contrast / Brightness / Color / Sharpness and Tint
(only activated for NTSC signals)
until the menu PICTURE is activated.
until the menu PICTURE is activated.
to highlight Noise Reduction. Press OK to display the menu.
to highlight Screen and press OK.
to select the picture setting to be changed:
until the menu PICTURE is activated.
to highlight the item Picture Mode. Press OK to display the
ASPECT
to display the desired item and press OK to
ENGLISH
65
button.