Acoustic Signals; Before First Use - AEG FAVORIT 65050 VI1P Benutzerinformation

24 www.aeg.com
5.2 ÖKO PLUS
This option decreases the temperature
in the drying phase. The energy con-
sumption decreases by 25%.
The dishes can be wet at the end of the
programme.
• Press ÖKO PLUS, the related indica-
tor comes on.

5.3 Acoustic signals

The acoustic signals operate when the
appliance has a malfunction, when the
adjustment of the level of the water soft-
ener occurs and when the programme is
completed.
By default, the acoustic signals are on,
but it is possible to deactivate them.
How to deactivate the acoustic signals
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a programme".
2. Press and hold, at the same time,
button

6. BEFORE FIRST USE

1. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
6.1 Adjusting the water softener
German
degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
and button until the
Water hardness
French
degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
indicators of buttons
start to flash.
3. Press button
•
The indicators of buttons
• The indicator of button
ues to flash.
• The display shows the current set-
ting.
4. Press button
ting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent
and do not load the baskets.
mmol/l Clarke
degrees
8.4. - 9.0 58 - 63
7.6 - 8.3 53 - 57
6.5 - 7.5 46 - 52
5.1 - 6.4 36 - 45
4.0 - 5.0 28 - 35
.
go off.
Acoustic signals
on.
Acoustic signals
off.
to change the set-
Water softener
adjustment
Level
10
9
8
7
6
, and
and
contin-